Product Category menu

Category background

Sprayable To Low Pressure and Low Temperature

Product Detail Information

POLYTOP LP
Sprayable to low pressure and low temperature

Description
POLYTOP LP is two component, zero VOC's
(Volatile Organic Compound), 100% solid. POLYTOP LP is able to spray coating with low pressure and low temperature condition. POLYTOP LP may be applied directly to most substrates, and where adhesion is critical a primer may be used.

Use

  • For waterproof coating on concrete and wood structures.(Airport, apartment, watertank, all most conc rete structures)
  • For wall decoration area.
  • For multi purpose protection coating.

Features

  • Zero VOC's (100% solid).
  • Possible spray low pressure, and low temperature condition.
  • Cures at -25°F to 300°F.
  • Excellent resistance to Thermal Shock.
  • Excellent resistance to solvent.
  • Excellent resistance to oil and acid(chemical).
  • Excellent bond strength to properly prepared surfaces.

Technical data(wet properties)

Appearance
liquid
Specific gravity(25°C)
"A" 1.12±0.1
"B" 1.02±0.1
Viscosity(cps)
"A" 1800±100
"B" 600±100
Thermal stability
0°C to 50°C
Shelf life(10-40°C)
(Unopened containers)
6months

(Processing peroperties)

Gel time
-
Tack free time
25-30sec
Recoat
0-12hr

(Dry properties)

Tensile strength ASTM D412
700±100psi
Elongation
450±50%
Hardness(Shore)
75-85(A)
Tear strength
50±10N/mm2
Abrasion resistance(1kg, 1000rev)
55mg(CS-17)
Impact resistance(Thickness 1mm)
Above 1.0kg.m

(Chemical resistance)

10%-Sulforic acid
Not change
30%-Sodiumcloride
Not change
30%-Sodiumhudroxide
Not change
50%-Sodiumhydroxide
Not change
Diesel
Not change
Salt water resistance
Not change

Application

  • Mix ratio 1:1, It must use spraying equipment for polyurea. And keep the pressure minimum 500-1000psi without heating.
  • These include ATEK, GRACO, SPI company product. And Gun Models include GRACO, SPI company product for polyurea spraying.
  • Component "B" must be mixed each day, while to spray.
  • Thinning is not required.
  • You check the "SSPC" before start spraying.

Caution

  • Store in warm place preventing from freezing.
    Contents should not be exposed for a long time.
  • In case of contact with skin and eyes, flush immediately with plenty of water and seek medical advice.
  • For further information, see the Material Safety Data Sheet.

Packing

  • POLYTOP HE "A" is available in 200L steel drums and "B" is in 200L steel drums.